Site Links

Shoutbox

Say Hi or something!

detroit1

2025-12-06, 09:52:48
Hi Dan, see you next month.

djkimmel

2025-11-26, 19:18:20
Move went fine. The new server is much faster. Which is good!

djkimmel

2025-06-08, 20:11:45
I'm planning on moving to a new server within the next 2 to 3 weeks. Just a little friendly warning as there might be a few hours of odd behavior when the process starts. I will try to have it done at night or weekend.

djkimmel

2025-03-04, 16:50:42
The Ultimate Sport Show Grand Rapids is March 13 - March 16 next week!

djkimmel

2025-03-04, 16:45:26
Please visit booth 1929 back by The Hawg Trough to say hi and wish me happy birthday while you're at it!  ;D

Advertisement

Welcome to Great Lakes Bass Fishing Forum. Please login or sign up.

Recent Topics

Latest Articles

Mon, 10 Nov 2025 17:21:19 +0000
I'm not trying to rush winter. I'm sure some semblance of winter is on the way. That means we are approaching the 2026 Ultimate Sport Show Tour - the three biggest fishing and outdoor sport shows in Michigan!
Fri, 07 Nov 2025 20:30:12 +0000
Yesterday at the Natural Resources Commission meeting in Lansing, science prevailed thanks to many, many persons who took the time to write in, and especially those who showed up to speak before the Commission on Commissioner Walters’ amendment to close bass fishing on the Inland Waterway and Black Lake from May 1 until the third Saturday in June.
Wed, 15 Oct 2025 22:09:35 +0000
Just before the October Natural Resources Committee meeting on Thursday, October 9, Commissioner John Walters added an amendment to Fisheries Order 206 – “Bass - Closed bass CIR season from May 1 – Friday before the third Saturday in June for Burt, Mullet, Crooked, Pickerel, and Black Lakes and their connecting waters.”
Fri, 04 Apr 2025 16:46:33 +0000
Now is the best time to be a bass angler on Lake St. Clair in at least the last 50 years according to a recent long-term MDNR fisheries research study.
Fri, 04 Apr 2025 16:00:54 +0000
Due to low water levels on the Great Lakes, particularly Lake St. Clair, the mouth of the channel at the Michigan DNR Clinton River Cutoff ramp needs to be dredged.

Advertisement

Trolling motor power loss

Started by Mike S., July 27, 2010, 09:31:17 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Mike S.

I took the prop off and there was nothing.  Thursday night, I went fishing with my buddy that I got the boat from, and while he was here I had him look at it.  The tm has a 12 volt or 24 volt switch on it.  On 24 volts, it runs, but slowly.  If you switch it to 12 volts, it won't do anything.  I have to look at my wiring.  Maybe I have something switched around?

djkimmel

Look at the plug first. The jumper. The connections inside the plug and at the back of the female end. Most common cause.

A less common cause is the control board in the motor. But often that means you have hi bypass only and slow power otherwise so I'm still betting on loose or corroded wiring.

Help stop invasive spcies. Don't move fish between unconnected bodies of water. Clean, drain and dry your boat before launching on another water body.
Unless clearly stated as such, opinions expressed by Dan Kimmel on this forum are not the opinions or policies of The Bass Federation of Michigan.

Mike S.

I'm not seeing anything with the plug as the issue.  I was just out playing with it and I am 100% certain that it is only pulling power from 1 battery.  I disconnected them one at a time, and found that it is running from just one, while the switch on the motor is on 24 volt.  If you switch it to 12 volts, it just stops running on 1 or 2 batteries.  I chased the wires from the battery it isn't running from, to the breaker in the back of the boat, and tried to reset it.  Of the 2 buttons on the breaker, the one on the left is the only one that will push in.  When I hooked that battery back up, I got sparks.  The other battery doesn't do that.  I am posting a pic of the breaker, so that you can see what I'm talking about.  I am going to pull it out tomorrow and see if there's a bad connection to it, being as it looks pretty crusty in the pic I took.

djkimmel

That would be the next place to look for a loose,corroded or bad connection. You might just need a new breaker switch which is a lot cheaper than a new motor. Good luck.

Help stop invasive spcies. Don't move fish between unconnected bodies of water. Clean, drain and dry your boat before launching on another water body.
Unless clearly stated as such, opinions expressed by Dan Kimmel on this forum are not the opinions or policies of The Bass Federation of Michigan.

Mike S.

The breaker switch for the second battery is shot.  I have power from the battery to the breaker, but nothing from the breaker to the tm.  Now I just have to find a pair quickly here in town.  Figure I might as well change both while everything is apart.  Thanks for the help guys.

Powered by AnglerHosting.com