Used Boat

[LUMBERLEO]

O.K. so I got the new boat.  2000 Ranger r73..  It has two Lowrance sonars on it.  I wanna put my color gps/sounder on this boat.  How big of a pain in the neck is that going to be?  Is that something I should try and do myself.  Has anyone done it before.           

Also, I wanted to thank everyone for the advice I have had the boat out a few times and it is great.  The only problem I have is that the bilge blows the fuse all the time.   


Scott

[chase5004]

It is no big deal putting your own GPS/ Sounder on. Just make sure you don't have any air bubbles in you apoxy when you glue your transducer down, and make sure it is on a flat, smooth, and level surface.

Pat

[smbassman]

If you don't have one, go buy a fish tape(spring steel wire routing device - not the fish measuring device ) to help pull your wires and cables.  You will use it enough over the years to make it worth it.  If you have to drill into fiberglass to mount the GPS/sonar, put heavy masking tape over the glass before you drill and use a very sharp drill bit to keep from chipping the gel coat.

For the bilge pump - check your wire connections.  They are probably corroded.  If they are, replace them with bullet connectors and buy a spare bilge cartridge (assuming they are mayfair's) and put the same bullet connectors on them for easy replacement while on the water. 

Good luck with the new boat - it won't be long before you are grumbling about the dang snow and ice keeping you from playing with your best friend!!!