Great Lakes Bass Fishing Forum

About Fishing Products including Make Your Own => Bass Fishing Products => Topic started by: Big dreams on June 19, 2013, 09:39:20 PM

Title: P Line FlouroClear
Post by: Big dreams on June 19, 2013, 09:39:20 PM
Anyone use this stuff?  It is great line for the most part.  I keep having issues with line snapping after a day of use.  I find that after each day, I need to strip 25' off or else I lose a lure while casting.  Just makes a loud SNAP and the lure flies away.  I thought it might be my rod but it happens with all of them. 
Title: Re: P Line FlouroClear
Post by: bigjc on June 19, 2013, 09:45:18 PM
Sounds like junk to me. I demand a line that is more dependable than that, which is why I stick to mostly co-polymer.
Title: Re: P Line FlouroClear
Post by: gmetime24 on June 19, 2013, 11:08:40 PM
Tried this line in the past and didn't like it. It's not 100% flourocarbon it only has a coating of flouro on it. Memory of the line was bad also had a couple break offs. Pline makes a good line that is 100% flourocarbon called ultimate flouro, don't have any problems with that
Title: Re: P Line FlouroClear
Post by: Slipkey on June 20, 2013, 12:03:08 AM
The Flouroclear is my least favorite line that P-Line makes, though I'm a fan of their CX (also fluorocarbon coated), CXX and Halo.   I've run in to bad batches of premium lines in the past that were brittle. Most of the time, those were purchased from small tackle shops (or places like MC that don't work through their line supply fast) and had probably been sitting too long on the shelf or wasn't stored properly.  Now I mostly buy line from high-volume retailers like Cabela's.

I personally like the fluorocarbon coating as it seems to add a bit of sensitivity to the line and, since fluorocarbon is slicker and more resistant to dirt, casts farther.  IMHO, ditch the Flouroclear and go with CX Premium or a full Flouro.
Title: Re: P Line FlouroClear
Post by: rudycard72 on June 20, 2013, 08:34:48 AM
I use P-line flouroclear and have for several years, without any issues. I also use a line conditioner withit.
Title: Re: P Line FlouroClear
Post by: Big dreams on June 20, 2013, 12:37:46 PM
I use line conditioner as well.  Bad thing is I bought a 3000 yard spool from BPS and only have used maybe 1000 so far.  So the CX is flouro coated, is the CXX coated as well?  I was thinking about switching to Seagar InvisX.
Title: Re: P Line FlouroClear
Post by: thedude on June 20, 2013, 03:18:06 PM
used to use it alot and liked it. was very strong line for the # rating. That said, i don't use anything but fluoro or braid these days. I went back to some pline in a pinch a year ago and could barely fish with it. just doesnt feel right.

i would highly recommend a good fluro like seagar invizx or trilene 100%. i've heard pline fluro is good too.
Title: Re: P Line FlouroClear
Post by: FOB on June 20, 2013, 04:54:35 PM
I have used nothing but 10# FlouraClear on my spinning rods for the last 5 years - have had zero issues.  No memory, breaking, issues - non.  I would take a Q-tip and check all of your guides though, as that my be the problem. 
Title: Re: P Line FlouroClear
Post by: Slipkey on June 20, 2013, 05:03:35 PM
Quote from: Big dreams on June 20, 2013, 12:37:46 PM
I use line conditioner as well.  Bad thing is I bought a 3000 yard spool from BPS and only have used maybe 1000 so far.  So the CX is flouro coated, is the CXX coated as well?

CX Premium is also flouro coated.  Invisibility is actually the least of flouro's benefits.  The "slick" factor in repelling dirt and grime is a big plus.  That's one of the reasons why the use flouro waxes and powders for race skis on old snow - it repels the dirt in the snow better (off-topic but I was having a Cliff Claven moment...).   Fish for a day in waters with a big algae bloom, cottonwood, etc. with flourocarbon coated line vs. mono and you'll see the difference. In addition to FOB's good point about your guides, the bulk spool might might also be suspect, per my previous post.  I doubt they move many 3000 yard spools in a year, whereas their filler spools probably rotate frequently through inventory. I'm sure BPS would exchange the spool for you if you let them know the problem.
Title: Re: P Line FlouroClear
Post by: BIGSHOW on June 20, 2013, 08:18:55 PM
I've had no problems with Seagar InvisX. This stuff is great on baitcaster and spinning. I am extemely happy with the spinning. I haven't  had any problems with it at all. Way better that mono in most situations. The only problem is i've switched from useing palomar knot to the clinch knot which I used to use. just seems to work better.
Title: Re: P Line FlouroClear
Post by: Big dreams on June 21, 2013, 07:39:50 AM
Quote from: FOB on June 20, 2013, 04:54:35 PM
I have used nothing but 10# FlouraClear on my spinning rods for the last 5 years - have had zero issues.  No memory, breaking, issues - non.  I would take a Q-tip and check all of your guides though, as that my be the problem. 
I was thinking the same thing and will do that tonight.  I haven't done it yet because I am having the same issues with all rods that have it on.
Title: Re: P Line FlouroClear
Post by: djkimmel on July 03, 2013, 11:33:17 AM
I have bought spools of various brands in the past when I went through a lot more line that I thought had a problem. It sometimes caused me to switch entire brands. Fishing line does have a shelf life. I would think you got a bad or weak spool? I've used a fair amount of Floroclear (http://p-line.com/line/fluorocarbon-coated/floroclear) and haven't had those kinds of problems. I tend to use it more for leaders on Spectrex IV braid now because I use so much P-Line HALO (http://p-line.com/line/fluorocarbon/halo) instead on my spools. My personal favorite.

Keep fishing line stored out of light, especially direct sunlight. With anything fluorocarbon, make sure knots have good lubrication before pulling it tight. Fluorocarbon is dense and quickly build heat which quickly weakens fishing line. Better quality guides also help with Fluorocarbon. All that casting, retrieving and fighting fish also can build up heat.

I believe CXX does not have any fluorocarbon in or on it. It is a copolymer blend of different mono lines as far as I can recall.
Title: Re: P Line FlouroClear
Post by: bigjc on September 21, 2013, 10:04:14 PM
I have stated this before but it is worth stating again: I only use flouro when fishing ultra clear water.  For about 75 percent of the fishing that I do, I swear by Silver Thread copolymer line.  I use 8pound green for spinnning and 10 - 17 pound for most baitcast applications.  Anything heavier than that and I switch to braid.

I now only have flouro on a couple of rods and use absolutely no mono at all, inspite of the fact that it probably has a few good applications.
Title: Re: P Line FlouroClear
Post by: BIGSHOW on September 25, 2013, 07:47:59 PM
Mono's still good for top water,buzzbaits and some spinnerbaits. At least from what I've read/done.
Title: Re: P Line FlouroClear
Post by: bigjc on September 25, 2013, 09:21:50 PM
I would agree that mono is good for top water applications, but since I don't keep a rod in the boat dedicated to topwater, I don't see a need to keep one with mono.
Title: Re: P Line FlouroClear
Post by: BIGSHOW on September 26, 2013, 03:08:53 PM
Good point. And thats pretty much true for me. Although i have one, most of the time I don't have it with me. I just use one of my others. if I kept one for every app. I wouldn't have room
Title: Re: P Line FlouroClear
Post by: djkimmel on September 30, 2013, 11:03:24 PM
Not as big a deal to have an extra reel or two ready to go and just swap them out on a rod if you need to change up.